How To Measure Camlock Fittings

March 26, 2024 Post a Comment

How to measure camlock fittings

The length of a cam lock is measured from the center of the hole to the end of cam, start behind the cam head and measure along with the cylinder to the inside face of the cam.

How is cam lock hose fitting measured?

Getting a Precise Measurement Female camlock sizes are referred to by their inside diameter or ID. To obtain the proper size of the coupler, you would measure from one inside edge to the other inside edge of the coupler. Both the OD and ID of the camlock fittings you are joining should match.

How do you measure couplings?

Calculating The Inside Diameter With A Digital Caliper

Place the inside tips of the caliper on the inside of the bowl (coupling)
Expand the tips of the caliper until they're fully extended to the bowl size.
This will give you the correct size of the bowl needed.
1.75 is equivalent to a 1 3/4 size bowl.

How do you fit a camlock fitting?

Camlock couplings are very simple to use. To install a camlock fitting, ensure that the handles are extending outward in the non-sealing position. Then, fit the desired male adaptor into the female coupler end. Close both handles at the same time to engage the gasket and seal the male and female halves together.

What sizes do cam connectors come in?

Sizes ½” up to 6” are available for Aluminum, Brass and Stainless Steel. Polypropylene is supplied in sizes ½” up to 4”. All ½” kamlock fittings come standard with 2 handles for better performance.

How do you measure hose fittings?

Measure the Outside Diameter (OD) of your pipe or pipe fitting:

Wrap a string around the pipe.
Mark the point where the string touches together.
Use a ruler or measuring tape to find the length between the tip of the string and the mark you made (circumference)
Divide the circumference by 3.14159.

Are cam locks interchangeable?

Are Camlocks Interchangable? Between manufacturers, cam & groove couplings are interchangeable as they are built to the same standards. (The standard for cam & groove couplings is based on the US military specification Mil-C-27487 now superseded by A-A-59326D.

What does cam lock stand for?

The name "Cam Lock" comes from the Cam or Lever that is used to lock one hose or fitting into place with another one. The female connector has two cams as part of the assembly. The male connector has a shape that allows the cams to lock into place.

How do you use a male and female camlock?

The assembly consists of a male groove adapter and female coupler. ... To connect and disconnect:

Extend the handles on the coupler outwards and place the correct size male adapter into the female coupler.
Close both handles at the same time until the two halves are firmly fixed together.

How is quick connect fitting measured?

Measure the diameter of the thread If you are measuring the male half of the coupling (external thread) make sure you use the bottom clamps of the caliper, and if you are measuring the female half of the coupling (internal thread) use the top clamps of the caliper to get the right measure.

How do you measure a male coupling?

For the female part of the coupling, (also known as the coupler) the size is obtained by measuring the diameter of the open end, or inside diameter (ID). For the male part of the coupling (adapter), the size is obtained by measuring the diameter of the adapter end, or outside diameter (OD).

How are DIN fittings measured?

There are two options to determine the size of your DIN 32676 fittings:

Utilizing a measuring calipers, take a measurement at the flanged end which is the widest part of your fitting utilized by clamps.
Note this measurement as the OD of Flange End of the tube fitting.
Note: DIN 10, 15 & 20 have the same flange OD.

What is Type A Camlock?

Type A stainless steel camlock couplings have male adaptors & female threads of the same size. The male grooved end can be inserted into any female couplers such as Type D, B, C & Dust Cap with identical size. Various gaskets are provided.

How much pressure can a cam lock hold?

Depending on the temperature, aluminum camlock pressure ratings vary from <50psi to ~250psi. Stainless steel camlock fittings are known for being extremely strong and durable. They are typically used in food and sanitary fields.

Do camlock fittings leak?

Camlock fittings are widely used in every industry to provide quick bonding between pipes and hoses. They are economical and don't need any additional tools to deal with. Their male adapter and female coupler mating provide a quick leak-free seal.

How do you remove a metal cam lock?

One of the fastest (but destructive) ways to remove metal cam lock is to drill it out of the furniture. In this case, a standard ¼-inch bit attached to a power drill is the finest tool combo that goes right through the mechanism center. While drilling, you can destroy its locking mechanism to get rid of the cam lock.

What is a cam and groove fitting?

Cam and groove fittings and gaskets are hose couplings that connect or disconnect pipe, tubing, or hose without tools. Cam and groove fittings, also known as camlock couplings, consist of a grooved male adapter and a female cam with handles or arms.

How does camlock fitting work?

Camlock fittings have both a male and female end, as well as arms that help to lock the ends together when they connect. The male and female ends are designed to align perfectly with each other.

How are threaded fittings measured?

For male pipe threads, be sure to measure the outside diameter at the widest point of the threads. For female pipe threads, measure the inside diameter at the widest point of the threads. You can then use these measurements to find the right size in a nominal pipe size conversion chart .