What Is The Difference Between Jic And An Fittings

June 26, 2024 Post a Comment

What is the difference between jic and an fittings

JIC Steps In The majority of the hydraulic population agrees, the JIC (or SAE) 37 degree fittings are generally interchangeable with AN fittings.

Are JIC and an threads the same?

JIC fittings are dimensionally identical to AN (Army-Navy) fittings, but are produced to less exacting tolerances and are generally less costly. SAE 45-degree flare fittings are similar in appearance, but are not interchangeable, though dash sizes 2, 3, 4, 5, 8, and 10 share the same thread size.

How do I know if my hydraulic fittings are JIC?

Four steps to know if your fittings are JIC:

Identify if the thread is parallel or tapered. NPT/NPTF and BSPT are tapered threads while UN/UNF and BSPP are parallel.
Determine the flare angle by using a calipers.
Determine the thread diameter. ...
4.Identifying the thread by gauge.

What is an An style fitting?

AN stands for Army-Navy. AN fittings are a particular type of fitting used to connect flexible hoses and fluid-carrying metal tubing together. The name is derived from a standardized joint agreement between the Army and Navy during World War II regarding the size specification of the fitting.

What does JIC stand for fittings?

Connection Types: JIC (Joint Industry Council) What are JIC Fittings? JIC (or Joint Industry Council) fittings, defined by SAE J514, are compression fittings machined with a 37 degree flare seating surface and parallel threads. They are commonly manufactured in nickel alloys, brass, carbon & stainless steel.

Do JIC fittings need O rings?

Most commonly used as hydraulic fittings in the fluid power industry, JIC (Joint Industry Council) fittings are a type of flare fitting machined with straight threads using a 37° flare seating surface. This is used to form the seal of the fitting instead of an o-ring or tapered threads.

Do JIC fittings need sealant?

Even though JIC threads seal with a metal-to-metal connection, no thread sealant is required to achieve a leak free connection.

What degree flare are an fittings?

The U.S. Air Force, with help from Wright Patterson Air Force base, developed a fitting with 37° flare angle, before WWII, which became known as the "AN" fitting.

Is JIC and NPT compatible?

JIC fittings is absolute different seal, not interchangeable. JIC hydraulic fittings is used in high pressure system, NPT fittings is used in low-pressure system. NPT pipe threads have always been popular, as leaks can be fixed by simply tightening the fitting.

Are flare and an fittings the same?

AN and JIC Fittings Interchangeability AN 37° flare and industrial 37° flare fittings function identically. In many cases, they appear to be functionally interchangeable, but they are not.

What are the different types of hydraulic fittings?

Types of hydraulic fittings vary depending on their sizes, configuration, and thread types. The three most common types of hose fittings are O-ring, mated angle and threaded.

How do I know what type of hydraulic fittings I have?

There are six types of threads commonly used on hydraulic tube fittings: UN/UNF. NPT/NPTF. BSPP (BSP, Parallel) ... Four Steps to Thread Identification

Step 1 – Determine if the thread is tapered or parallel.
Step 2 – Determine the pitch. ...
Step 3 – Determine the size. ...
Step 4 – Designate the thread.

Why use an AN fitting?

People use AN fittings because they look cool and provide a secure fitting that seals hoses better than traditional push on nipples and hose clamps. They form a serviceable connection that provides a reliable seal.

What is a an hydraulic fitting?

What are hydraulic fittings? Hydraulic Fittings are used to connect a hydraulic hose to components like hydraulic cylinders, pipes, tubes, or different types of hydraulic hoses. The different types of hydraulic fittings allow the fluid to flow, change its direction, divert, or mix.

How much psi can an AN line hold?

These hoses handle pressure up to 250 psi and can be used on many different parts the car.

Is JIC better than NPT?

JIC fittings come with a 37O flare angle, while the NPT fittings rely on just their tapered threads for sealing. As a result, JIC fittings offer better sealing capabilities and can withstand higher working pressures.

Are SAE and JIC fittings interchangeable?

SAE and AN/JIC fittings are completely incompatible due to the different flare angle. Furthermore, AN fittings (or those complying with subsequent standards) and JIC fittings are not interchangeable for design-controlled applications due to differing quality standards.

What is the best type of hydraulic fitting?

To address high operating pressure, more and more of our customers prefer to use O-ring seals. They are more resistant to cracks. O-ring seals also prevent the risk of over-torqueing and leakage. In terms of material stainless steel hose fittings have the highest pressure rating.

Why do some AN fittings have O-rings?

When two parts of a fitting are joined, the O‑ring is compressed to create a tight, leak proof seal. While simple in design, O‑rings are a critical component in a variety of pressure systems found in industrial, agricultural, and automotive applications.